ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (NXT1HSSI) > HSSI MENUS > TEST > REMOTE LPBK (HSSI)
Write security: 4; Read security: 5
Transmits a loopback request to the remote DTE interface. The following local loopbacks are available:
EXTERNAL DCE Transmits a loopback request to the remote DTE interface. All data
transmitted out the HSSI (or HSSI/V.35) DTE interface will be echoed back
by the remote DCE equipment.
MODULES MENU (ETHERNET SWITCH MODULE)
The ATLAS 550 system controller automatically detects the presence of the Ethernet Switch Module when
it is installed in the system (listed as ENET-8). To see the menus for the Ethernet Switch Module via the
terminal menu, use the arrow keys to scroll to the MODULES menu and press to access the module
choices. Refer to the Ethernet Switch Module Quick Start Guide for a menu tree containing a complete
listing of menus.
MODULES (ENET-8) > INFO
Read security: 5
Provides information about the module part number, serial number and assembly revision.
MODULES (ENET-8) > INFO > PART NUMBER
Read security: 5
Displays the part number of the module.
MODULES (ENET-8) > INFO > SERIAL NUMBER
Read security: 5
Displays the serial number of the module.
MODULES (ENET-8) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the installed module.
MODULES (ENET-8) > STATUS
Read security: 5
Displays the status of each Ethernet port located on the Ethernet Switch Option Module.
MODULES (ENET-8) > STATUS > PORT
Read security: 5
Indicates the operating port number. There are eight available Ethernet interfaces on the Ethernet Switch
Option Module.
172 © 2004 ADTRAN, Inc. 61200305L2-1B