ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
DIAL PLAN > NETWORK TERM > OUT#REJ > DATA 64K, DATA 56K, AUDIO, SPEECH
Write security: 3; Read security: 5
Rejects outgoing calls based on call type. For example, setting the reject number to $, Digital 56/64 to
ENABLED, and Audio and Speech to DISABLED will reject all digital calls, but accept analog calls.
This list may remain blank if the accept list meets desired filtering.
DIAL PLAN > NETWORK TERM > IFCE CONFIG
Write security: 3; Read security: 5
Specifies the configuration parameters for the endpoint. The selections displayed in this field are based on
the type of module selected in the SLOT/SVC option. For detailed information on submenus for a particular
module type, please refer to the dial plan interface configuration menu discussion for the appropriate
network, option, or resource module.
Some of the options available in this submenu change depending on the type of modules
selected in the SLT/SVC or PRT/PEP fields. For more information on these submenus, refer
to the individual module interface configuration discussions in this section.
DIAL PLAN > NETWORK TERM > SUBST TEMPL
Write security: 3; Read security: 5
The substitution template allows the ATLAS 550 to select calls (based on telephone number) and substitute
a user-defined number for the received digits after the call has been processed by the switchboard.
Substitution templates are created for each entry in the DIAL PLAN.
DIAL PLAN > NETWORK TERM > SUBST TEMPL > ORIGINAL#
Write security: 3; Read security: 5
Designates the number(s) to be the search criteria for the substitution template. The pattern can be a
specific number, or wildcards can be used as part of the number specification.
X = Any single digit
N = Any single digit 2 through 9
$ = Any number of digits of any value
9 = This specific number
[1,2,3...] = A single digit in this group
Example: 963-812[012] would be 963-8120 to 963-8122.
61200305L2-1B © 2004 ADTRAN, Inc. 253