ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
DIAL PLAN (DUAL NX56/64 MODULE)
DIAL PLAN (V35NX) > USER TERM
Write security: 3; Read security: 5
This menu allows the user to define option parameters for ports configured for V.35 connections.
DIAL PLAN (V35NX) > USER TERM > IFCE CONFIG
Write security: 3; Read security: 5
Specifies the configuration parameters for the endpoint.
DIAL PLAN (V35NX) > USER TERM > IFCE CONFIG > PORTS AVAILABLE
Write security: 3; Read security: 5
Indicates which ports of the selected Dual Nx 56/64 Option Module have been defined in this switched
endpoint (indicated by “!”), in another switched endpoint (indicated by “s”), or in a DEDICATED MAP
(indicated by “n”). This field is read-only. The following characters may display in this field:
0-4 This port is available.
* This port is requesting this port for this connection, but the port is not yet activated.
! This port is used by this endpoint.
S This port is used elsewhere in the switched DIAL PLAN.
S This port is in the switched dial plan and conflicts with this endpoint.
N This port is used in one or more DEDICATED MAPS.
N This port is in one or more DEDICATED MAPS, and conflicts with this endpoint.
DIAL PLAN (V35NX) > USER TERM > IFCE CONFIG > NUMBER OF PORTS
Write security: 3; Read security: 5
Specifies the number of V.35 ports ATLAS 550 uses for this endpoint.
DIAL PLAN (V35NX) > USER TERM > IFCE CONFIG > NUMBER TO DIAL
Write security: 3; Read security: 5
Specifies the number to dial on an outgoing call.
DIAL PLAN (V35NX) > USER TERM > IFCE CONFIG > CALL TYPE
Write security: 3; Read security: 5
Configures the call type (either 56K or 64K) used for outgoing calls from this endpoint.
DIAL PLAN (V35NX) > USER TERM > IFCE CONFIG > DIAL CALL AS
Write security: 3; Read security: 5
Allows the outgoing call to be treated as the selected call type. Options include DIGITAL (for 56K or 64K
data calls), VOICE (for speech calls), and AUDIO (for 3.1kHz audio calls).
61200305L2-1B © 2004 ADTRAN, Inc. 293