ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
DEDICATED MAPS (OCTAL E&M MODULE)
DEDICATED MAPS (E&M) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press to activate the submenus.
DEDICATED MAPS (E&M) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the TO/FROM connection. The following selections may apply to the Octal
E&M Option Module, depending on the application:
# PORTS
Write security: 3; Read security: 5
Defines ports to be used for this connection.
PORTS AVAILABLE
Write security: 3; Read security: 5
Indicates which ports of the module are assigned. Port assignment is based on the following items:
DIGIT 0-9 This DS0 is available. The digit that displays in this field represents the
last digit of the DS0 number.
* This DS0 has been requested for this connection, but the DS0 is not yet
activated for this port.
! This DS0 is used by this port in this connection and is currently
activated.
S This DS0 is used in the switched DIAL PLAN.
S This DS0 is used in the switched DIAL PLAN and conflicts with this
connection.
N This DS0 is already used in this DEDICATED MAP.
N This DS0 is already used in this DEDICATED MAP and conflicts with this
connection.
DEDICATED MAPS (NXT1 HSSI AND NXT1 HSSI/V.35 MODULES)
DEDICATED MAPS (NXT1 HSSI) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press to activate the submenus.
61200305L2-1B © 2004 ADTRAN, Inc. 241