ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
DEDICATED MAPS > CREATE/EDIT MAPS > ACTIVATE TIME
Write security: 3; Read security: 5
Sets the time when the map becomes active if you have selected AUTO in the ACTIVATE MAP field. Enter this
time in hh:mm:ss 24-hour format.
DEDICATED MAPS > CREATE/EDIT MAPS > ENBL DAY
Security level: 3; Read security: 5
Specifies which days of the week the map is active.
DEDICATED MAPS (T1/PRI NETWORK OR DUAL/QUAD T1/PRI MODULES)
DEDICATED MAPS (T1/PRI) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press to activate the submenus.
DEDICATED MAPS (T1/PRI) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the TO/FROM connection. The following selections may apply to the T1/PRI
Network Interface and Dual/Quad T1/PRI Option Modules, depending on the application:
DS0 SELECTION
Write security: 3; Read security: 5
Defines DS0s for a T1 port. Use this field to define the DS0s for this connection. You can enter the
DS0s in several ways. For example, to enter DS0s one through five, enter 1-5. For DS0s one and
five, enter 1,5.
DS0 AVAILABLE
Write security: 3; Read security: 5
Indicates which DS0s of the T1 are assigned. DS0 assignment is based on the following items.
DIGIT 0-9 This DS0 is available. The digit that displays in this field represents the last digit of
the DS0 number.
* This DS0 has been requested for this connection, but the DS0 is not yet activated
for this port.
! This DS0 is used by this port in this connection and is currently activated.
S This DS0 is used in the switched DIAL PLAN.
S This DS0 is used in the switched DIAL PLAN and conflicts with this connection.
N This DS0 is already used in this DEDICATED MAP.
N This DS0 is already used in this DEDICATED MAP and conflicts with this connection.
61200305L2-1B © 2004 ADTRAN, Inc. 233