ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
SYSTEM UTILITY > SYSTEM SELFTEST > CLEAR SELFTEST LOG
Write security: 3; Read security: 5
Clears the self-test log.
SYSTEM UTILITY > PING
Self-test log messages are not available once the log is cleared.
Write security: 5; Read security: 5
Allows you to send pings (ICMP echo requests) to devices accessible via the ETHERNET interface.
Only one ping session can be active at a time.
SYSTEM UTILITY > PING > IP ADDRESS
Write security: 5; Read security: 5
Specifies the IP address to ping.
SYSTEM UTILITY > PING > COUNT
Write security: 5; Read security: 5
Specifies the number of pings to send. The default value is 4, and the maximum value is 99.
SYSTEM UTILITY > PING > SIZE (BYTES)
Write security: 5; Read security: 5
Specifies the size in bytes of the data portion of the ping request. The default value is 64 bytes, and the
maximum size is 1024 bytes.
SYSTEM UTILITY > PING > TIMEOUT (MS)
Write security: 5; Read security: 5
Specifies the time in milliseconds to wait for the ping reply before timing out. The default
timeout is 3 seconds (3000), and the maximum timeout value is 10 seconds (10,000).
SYSTEM UTILITY > PING > ROUND TRIP MIN
Read security: 5
Displays the minimum round trip time of the ping request/reply of the current set of pings.
SYSTEM UTILITY > PING > ROUND TRIP AVG
Read security: 5
Displays the average round trip time of the ping request/reply of the current set of pings.
98 © 2004 ADTRAN, Inc. 61200305L2-1B