ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
SYSTEM CONFIG > SNMP > DS1 CURRENT PERF THRESHOLDS > CURRENT CSS THRSH
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Controlled Slip Seconds (CSS)
parameter. The default value is 1 for an approximate BER level of 10E-5.
SYSTEM CONFIG > SNMP > DS1 CURRENT PERF THRESHOLDS > CURRENT PCV THRSH (D4)
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Path Code Violations (PCV)
parameter, when the Line Type is Super Frame (AT&T D4 format) DS1. The default value is 72 framing
errors for an approximate BER level of 10E-5.
SYSTEM CONFIG > SNMP > DS1 CURRENT PERF THRESHOLDS > CURRENT PCV THRSH (ESF)
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Path Code Violations (PCV)
parameter, when the Line Type is Extended Super Frame DS1. The default value is 13,296 CRC errors for an
approximate BER level of 10E-5.
SYSTEM CONFIG > SNMP > DS1 CURRENT PERF THRESHOLDS > CURRENT LES THRSH
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Line Errored Seconds (LES)
parameter. The default value is 65 for an approximate BER level of 10E-5.
SYSTEM CONFIG > SNMP > DS1 CURRENT PERF THRESHOLDS > CURRENT LCV THRSH
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Line Code Violations (LCV)
parameter. The default value is 13,340 for an approximate BER level of 10E-5.
SYSTEM CONFIG > SNMP > DS1 TOTAL PERF THRESHOLDS
Write security: 3; Read security: 5
Defines performance threshold values for DS1 Line and Path statistics. Refer to the ADTRAN Enterprise
MIB and DS1 Extension MIB (available on the ADTRAN website at www.adtran.com) for more MIB
specific information. If a statistic value exceeds its threshold value, then the corresponding Alert Trap will
be sent if the Alert Event is armed and Alert Traps are enabled. These thresholds apply to all DS1 interfaces
in the system.
SYSTEM CONFIG > SNMP > DS1 TOTAL PERF THRESHOLDS > TOTAL ES THRSH
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Total Errored Seconds (ES) parameter. The default
value is 648 for an approximate BER level of 10E-5.
SYSTEM CONFIG > SNMP > DS1 TOTAL PERF THRESHOLDS > TOTAL SES THRSH
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Total Severely Errored Seconds (SES) parameter.
The default value is 100 for an approximate BER level of 10E-5.
86 © 2004 ADTRAN, Inc. 61200305L2-1B