TABLE OF CONTENTS - BGB Analytik AG

Agilent splitless liners
Single taper splitless liner
Single taper, glass wool splitless liner
Double taper splitless liner
Direct Connect liners
Agilent Splitless Liners
www.agilent.com/chem/supplies
Inlet Liners
Agilent's proprietary deactivation is important for splitless liners because of the longer
sample/liner contact time in splitless mode.
When deciding between a liner with or without glass wool, choose a liner without glass wool
if your sample contains non-volatiles or analytes within a wide boiling range. For unknown
samples, use a liner without glass wool to avoid loss of active or labile compounds. Agilent
recommends first trying a liner without glass wool; use glass wool as a second choice.
Agilent Splitless Liners
Description 1/pk 5/pk 25/pk
Single taper, deactivated 5181-3316 5183-4695 5183-4696
Single taper, inert 5181-3316i
Single taper, glass wool, deactivated 5062-3587 5183-4693 5183-4694
Single taper, MS certified liner with glass wool 5188-6568
Double taper, deactivated 5181-3315 5183-4705 5183-4706
Straight, deactivated, quartz 5181-8818 5183-4703 5183-4704
Straight, non-deactivated, quartz 18740-80220 5183-4707 5183-4708
Straight, non-deactivated 210-3003 210-3003-5
Direct Connect Liners
Agilent's Direct Connect Liners provide maximum recovery and minimal decomposition of
active compounds for methods requiring splitless injection, such as EPA 8270. They are best
for relatively clean samples containing active analytes, such as water extracts. The liners
directly connect with the column, similar to press-fit connectors, to aid complete transfer
of sample onto the column, eliminating the problem of inlet discrimination and further
increasing sensitivity.
Direct Connect Liners
Description Part No.
Single taper, Agilent proprietary deactivation G1544-80730
Dual taper, Agilent proprietary deactivation G1544-80700
Single taper, deactivated, inert G1544-80731
GC and GC/MS
155