TABLE OF CONTENTS - BGB Analytik AG

GC and GC/MS
292
Non-Bonded Stationary Phases
Non-Bonded Stationary Phases
Whenever possible Agilent recommends the use of bonded and cross-linked polymers.
Bonded polymers are more rugged, will have longer lifetimes and can be solvent rinsed.
However, Agilent recognizes that some methods have been developed on these non-bonded
phases and therefore maintains these columns to support established methods.
HP-101
• 100% Dimethylpolysiloxane
Similar Phases: OV-101, SP 200, DB-1, HP-1
Because HP-101 columns are not bonded or cross-linked, we do not recommend solvent
rinsing.
HP-101
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.20 25 0.20 -60 to 280 19091Y-102
0.32 25 0.30 -60 to 280 19091Y-012
50 0.30 -60 to 280 19091Y-015
HP-17
• 50% Phenyl and 50% Methyl siloxane
Similar Phases: OV-17, SP-2250, DB-17, HP-50+
Because the HP-17 is not bonded or cross-linked, we do not recommend solvent rinsing.
HP-17
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.53 10 2.00 25 to 260/280 19095L-121
www.agilent.com/chem/supplies