10.09.2013 Views

TABLE OF CONTENTS - BGB Analytik AG

TABLE OF CONTENTS - BGB Analytik AG

TABLE OF CONTENTS - BGB Analytik AG

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

HPLC Column Protection<br />

Column Protection<br />

Guard columns and in-line filters are inexpensive and easy-to-use tools for column protection.<br />

They can improve the accuracy of the results and improve analytical column lifetime while<br />

enhancing reliability. Column protection is available for all sizes of columns with any particle<br />

size packed into the column.<br />

Guard Columns<br />

Guard columns provide protection against contamination with minimal impact on column<br />

efficiency. Prepacked ZORBAX cartridge columns are available for most types of ZORBAX<br />

material. Guard cartridges are available in different internal diameters to provide high<br />

efficiency protection to all types of columns. Guard columns are also available for many of the<br />

non-Zorbax columns. See the respective column listings for the available guard columns.<br />

Low Volume In-line Filters<br />

Low volume in-line filters are recommended for every column and provide column protection<br />

from particulate materials. An in-line filter will increase analytical column lifetime by<br />

preventing particulates (from unfiltered samples and/or eluents) from plugging the analytical<br />

column frit. Using guard columns can compromise the efficiency of very low volume columns<br />

and/or columns with very small particle sizes. For these columns, low volume in-line filters are<br />

strongly encouraged. A small, 0.5 µm frit should be used to maximize column efficiency.<br />

Replacement Column Inlet Frits<br />

If HPLC columns are used without a guard column on in-line precolumns filter; the analytical<br />

column may become plugged. Due to the high efficiency packing processes used today<br />

replacing the column inlet frit is discouraged. Column efficiency may be compromised if the frit<br />

is replaced. PEEK-encapsulated replacement frits are available for ZORBAX columns packing<br />

in 2.1 mm, 3.0 mm, 4.6 mm, and 9.4 mm standard column hardware.<br />

Replacement Inlet Frits (PEEK Encapsulated) for Standard Hardware<br />

Columns<br />

Description Diameter (mm) Unit Part No.<br />

Narrow Bore 2.1 10/pk 280959-904<br />

Solvent Saver 3.0 1/ea 280959-006<br />

Analytical 4.6 10/pk 280959-905<br />

Semi-Preparative 9.4 1/ea 280959-001<br />

www.agilent.com/chem/supplies<br />

HPLC Column Protection<br />

LC and LC/MS<br />

583

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!