TABLE OF CONTENTS - BGB Analytik AG

ICP-MS
Instrument Parts and Supplies
Work coil, G1820-65061
Quartz torch, G3270-67002
Torch and Components
Description Specs Use Part No.
Torch, quartz 2.5 mm ID Not suitable for samples containing hydrofluoric acid.
Must be completely dried before installing and igniting the plasma.
Replace if chipped, cracked, or distorted.
G3270-67002
Torch, quartz 1.5 mm ID, Not suitable for samples containing hydrofluoric acid.
G1833-65424
taper type Must be completely dried before installing and igniting the plasma.
Replace if chipped, cracked, or distorted.
Torch, quartz 1.0 mm ID, Not suitable for samples containing hydrofluoric acid.
G1833-65425
taper type Must be completely dried before installing and igniting the plasma.
Replace if chipped, cracked, or distorted.
Inert torch, quartz, without injector Quartz torch for inert sample introduction. Resistant to hydrofluoric acid.
Torch must be completely dried before installing and igniting plasma.
G1833-65422
Shield plate, long life Use with the bonnet G1833-65419
Bonnet (quartz ring for shield torch) Use with shield plate (P/N G1833-65406 or P/N G1833-65419)
for Shield Torch system. Replace if bonnet is cracked or damaged.
G1833-65421
Platinum Injector for Inert Torch 2.0 mm ID G1833-65409
Platinum Injector for Inert Torch 2.5 mm ID G1833-65415
Platinum Injector for Inert Torch 1.5 mm ID G1833-65416
Work Coil G1833-65432
824 www.agilent.com/chem/supplies
Inert torch, G1833-65422