TABLE OF CONTENTS - BGB Analytik AG

CAM Chromatograms
Industrial Chemicals
Amines in Water Page 422
Primary Amines Page 420
CAM
• Base deactivated polyethylene glycol
• Specifically designed for amine analysis
• Excellent peak shape for primary amines
• Replaces HP-Basicwax
Similar Phases: Stabilwax-DB, Carbowax Amine
www.agilent.com/chem/supplies
Non-Bonded Stationary Phases
Because the CAM is not bonded or cross-linked, we do not recommend solvent rinsing.
CAM
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.25 15 0.25 60 to 220/240 112-2112
30 0.25 60 to 220/240 112-2132
0.50 60 to 220/240 112-2133
60 0.25 60 to 220/240 112-2162
0.32 30 0.25 60 to 220/240 113-2132
0.50 60 to 220/240 113-2133
0.53 30 1.00 60 to 200/220 115-2132
Carbowax 20M and HP-20M
• Polyethylene glycol, MW 20,000
• Equivalent to USP Phase G16
Similar Phases: DB-WAX, HP-INNOWax, DB-WAXetr
Because the Carbowax 20M and the HP-20M are not bonded or cross-linked, we do not
recommend solvent rinsing. DB-WAX is the recommended bonded alternate for the HP-20M.
Carbowax 20M
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.25 30 0.25 60 to 220/240 112-2032
0.32 30 0.25 60 to 220/240 113-2032
HP-20M
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.20 25 0.10 60 to 220 19091W-102
50 0.10 60 to 220 19091W-105
0.32 25 0.30 60 to 220 19091W-012
50 0.30 60 to 220 19091W-015
0.53 10 1.33 60 to 220 19095W-121
30 1.33 60 to 220 19095W-123
GC and GC/MS
293