TABLE OF CONTENTS - BGB Analytik AG

LC and LC/MS
Cartridge Column Systems
Cartridge Column Systems
Cartridge Selection Guide
Icon* Type of Cartridge Features Benefits
Agilent HPLC Cartridge Can reverse collets in the end fitting to add
guard cartridges
ZORBAX Guard Cartridge:
Stand alone system
ZORBAX Rapid Resolution and Rapid
Resolution HT Cartridge Columns:
3.5 µm and 1.8 µm packings, stand alone
system
ZORBAX Semi-Preparative Guard HPLC
Hardware Kit:
Stand alone system
ZORBAX and Agilent Prep Preparative
Cartridge Column and Guard HPLC System:
Stand alone and integral hardware options
Cartridges have a unique filter and sieve
at each end
High efficiency, stand-alone, low dead
volume cartridge
Polymeric cartridge designed for leak-tight
seals against metal surfaces
576 www.agilent.com/chem/supplies
Inexpensive
Extends column lifetime
Permits rapid column changes
Can use 2, 3, 4 and 4.6 mm cartridges
Helps prevent blockage
Seals up to 400 bar
No gaskets required
More solvent-resistant than PEEK
Reusable fittings Adapt for connections to 1/16 in. LC fittings
For high throughput LC/MS, LC/MS/MS
and combinatorial separations
Packed with Eclipse XDB for pH use from 2-9
Packed with StableBond for low pH use
Sold individually or as three-packs
*Look for these icons on subsequent pages to help you select the proper guard cartridges and columns.
For all analyte types
Low bleed
Easy low-dead-volume assembly Seals up to 2000 psi (135 bar, 13.5 MPa)
Tubing (polyphenylene sulfone) designed
for leak-tight seals against metal surfaces
No gaskets required
Reusable fittings Adapt for connections to 1/16 in. LC fittings
Easy low-dead-volume assembly Extends column lifetime
Reusable fittings Permits rapid column changes
Hardware options for integral
and external guards
Can use with 21.2 and 30 mm ID columns