TABLE OF CONTENTS - BGB Analytik AG

GC and GC/MS
160
Capillary Column Ferrules and Nuts
Graphite ferrules, 5080-8853
Tips & Tools
100% Vespel ferrules
should only be used for
isothermal applications.
Tips & Tools
SilTite ferrules are required for
leak-tight seals with the
Ultimate Union, Deans Switch,
and Effluent Splitter.
Capillary Column Ferrules
Ferrule ID (mm) Column ID (mm) Unit Part No.
General Purpose Graphite Ferrules (Short)
0.5 0.1, 0.2, 0.25, 0.32 10/pk 5080-8853
0.4 0.05, 0.25 10/pk 500-2114
0.8 0.45, 0.53 10/pk 500-2118
1.0
85% Vespel, 15% Graphite Ferrules (Short)
0.53 10/pk 5080-8773
0.4 0.1, 0.2, 0.25 10/pk 5181-3323
0.5 0.32 10/pk 5062-3514
0.8 0.45, 0.53 10/pk 5062-3512
Preconditioned 85% Vespel, 15% Graphite Ferrules (Long)*
0.3 0.1 10/pk 5062-3507
0.4 0.1, 0.2, 0.25 10/pk 5062-3508
0.5 0.32 10/pk 5062-3506
0.8 0.53 10/pk 5062-3538
100% Vespel, High Performance Ferrules (Short)**
0.4 0.1, 0.2, 0.25 10/pk 5181-3322
0.5 0.32 10/pk 5062-3513
0.8
Specialty Ferrules, 85% Vespel, 15% Graphite
Two Hole
0.45, 0.53 10/pk 5062-3511
0.4 0.1, 0.2, 0.25 10/pk 5062-3580
0.5 0.32 10/pk 5062-3581
No hole
High Temp PTV Inlet, SS/Graphite
10/pk 5181-3308
0.4 0.320 10/pk 5188-5315
0.4 0.530 10/pk 5188-5314
*These ferrules are recommended for use with Agilent GC/MS Transferlines with the 05988-20066 MS interface column nut.
**These ferrules are recommended for use in isothermal analysis only.
SilTite Metal Ferrules
Description Unit Part No.
For use with 0.25 mm ID capillary columns 10/pk 5188-5361
For use with 0.32 mm ID capillary columns 10/pk 5188-5362
For use with 1/16 in. od stainless steel tubing
Includes 2 column nuts
10/pk 5184-3571
For use with 0.53 mm ID capillary columns 10/pk 5188-5363
www.agilent.com/chem/supplies