TABLE OF CONTENTS - BGB Analytik AG

1200 Series LC Solution Kits
Biocompatibility Kit
Description Part No.
Biocompatibility kit 5065-9972
Needle seat PEEK without capillary, G1313A G1313-87104
Needle assembly, for use with PEEK seat G1313-87203
PEEK seat tubing, 0.17 mm ID, 100 mm, 2.3 µL G1313-87302
PEEK capillary, 0.25 mm ID, 160 mm connecting valve
with metering device of G1313 autosampler
G1313-87306
PEEK loop capillary for 100 µL sample G1313-87309
Rotor seal, PEEK, 2-groove for G1367B, 400 bar 0100-2231
ZDV union, PEEK with fittings 0100-2441
PEEK RheFlex 2-piece fittings, 5/pk 0100-1631
PEEK Tubing, 0.25 mm ID, 15. m 0890-1762
PEEK Tubing, 0.18 mm ID, 1.5 m 0890-1763
Solvent inlet filter, PTFE, 10 µm pore stepped tubing connector, metal free 3150-0958
1/16 in. finger-tight PEEK fittings, beige 5063-6591
www.agilent.com/chem/supplies
1200 Series LC Solution Kits
Capillary Kits for Column Selection
Description Part No.
Method development capillary kit, low dispersion, short columns
5067-1595
Contains capillaries (0.12 mm ID), fittings and low dispersion heat exchanger
for up to 8 columns of up to 100 mm length
Method development capillary kit, general purpose
5067-1596
Contains capillaries (0.17 mm ID) and fittings for up to 6 columns
of up to 250 mm length
Method development capillary kit, low dispersion, long columns
5067-1597
Contains capillaries (0.12 mm ID), fittings and low dispersion heat exchanger
for up to 6 columns of up to 250 mm length
Solvent Selection Supplies
Description Part No.
Solvent selection tubing kit, 4 solvents 5067-4601
Cover kit for binary pump 5067-1567
Cover kit for quaternary pump 5042-9912
Solvent cabinet 5065-9981
LC and LC/MS
529