TABLE OF CONTENTS - BGB Analytik AG

GC and GC/MS
272
Pesticides Columns
Pesticides Columns
Agilent J&W low bleed columns are ideal for the analysis of pesticides. Not only do they
possess less bleed than a standard polymer, which improves the signal to noise ratio and
minimum detectable quantities, but they also have higher upper temperature limits which
allow for faster run times. Agilent also offers several common phases with additional pesticide
specific testing to ensure performance for your application.
Recommended Columns for Pesticides
• DB-35ms (P/N 123-3832) and DB-XLB (P/N 122-1236) for CLP pesticides,
chlorinated herbicides, and EPA Method 508.1 pesticides
• High efficiency 0.18 mm ID DB-17ms (P/N 121-4722) and DB-XLB (P/N 121-1222)
for faster analysis
• Also ideal for other dual ECD applications such as 8082 PCBs (Aroclors)
and haloacetic acids
• DB-5ms (P/N 122-5532) and DB-35ms (P/N 122-3832) for organophosphorous pesticides
(EPA Method 8141A)
• HP-5ms for over 550 pesticides using retention time locking software and database
HP-PAS5
• Non-polar
• Specifically designed and processed for the analysis of organochlorine pesticides
• ECD tested to assure minimal pesticide breakdown and low ECD bleed
• Bonded and cross-linked
• Solvent rinsable
Similar Phases: DB-5, Ultra-2, SPB-5, CP-Sil 8CB, RSL-200, Rtx-5, BP-5, CB-5, OV-5, 007-2
(MPS-5), SE-52, SE-54, XTI-5, PTE-5, HP-5MS, CC-5, ZB-5
HP-PAS5
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.32 25 0.52 -60 to 325/350 19091S-010
www.agilent.com/chem/supplies