TABLE OF CONTENTS - BGB Analytik AG

Ordering Information
Ordering Information
Custom GC Column Specification and Order Form
• For best results, please photocopy this page, fill in the required
information, and mail, fax, or email to Agilent Technologies.
For all your custom capillary columns ordered, reference part
number 100-2000.
• If you require assistance, please contact 1-800-227-9770,
press option 4 (column technical support), then press option 1
(GC phase application support).
Type I
Type of Phase Length (m)
Internal
Diameter (mm)
Internal
Diameter
(mm) Length (m)
Film Thickness
(µm)
Type IV – Dual Column
Column #1
Column Part Number
Column #2
Column Part Number
5" Cage or
Standard Cage
Type III – Guard Column or Transfer Line
Leak Free U
Column Part Number
or
Guard – Front End
or
or
or
Fill in Parameters as Type I
Transfer Line – Back End
Internal
Diameter
(mm) Length (m)
Fill in Parameters as Type I
Fill in Parameters as Type I
Leak Free Y Guard Column Length (m)
Mail: Agilent Technologies
2850 Centerville Road
Wilmington, DE 19808
Attn: Customer Service
Fax: 302-633-8901
Type II – Duraguard
Column Part Number
Guard – Front End
Length (m)
890 www.agilent.com/chem/supplies
Email: custom_columns@agilent.com
(for U.S., Canada, and Puerto Rico)
All other countries, please contact your local
Agilent Representative or Agilent Authorized Distributor.
or
or
Internal
Diameter (mm)
Fill in Parameters
as Type I
Transfer Line –
Back End Length (m)
Note: Choose Guard Column or Transfer Line