TABLE OF CONTENTS - BGB Analytik AG

HP-PLOT Q Chromatograms
Environmental
N2O I Page 396
Petroleum
Baseline Resolution of
Air/CO, CO2, and Methane
in a Natural Gas Sample
Ethylene Oxide Synthetic
Standard
Page 466
Page 479
Oxygenates Page 480
HP-PLOT Q
www.agilent.com/chem/supplies
PLOT Columns
• Bonded polystyrene-divinylbenzene based column
• A PLOT column with polarity between Porapak-Q and Porapak-N
• Excellent column for C1 to C3 isomers and Alkanes to C12, CO2, methane, air/CO,
oxygenated compounds, sulfur compounds and solvents
• A PLOT column to replace packed gas-solid columns
• Separates ethane, ethylene and ethyne (acetylene)
• Improved resolution in less time than conventional packed columns
• Minimal conditioning time required – 1 hour
• Preferred "Q" column due to its robust nature
Similar Phases: CP PoraPLOT Q, CP PoraPLOT Q-HT, Rt-QPLOT, SupelQ PLOT, GS-Q
Refinery Gas I Page 473 HP-PLOT Q
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.32 15 20.00 -60 to 270/290 19091P-QO3
30 20.00 -60 to 270/290 19091P-QO4
0.53 15 40.00 -60 to 270/290 19095P-QO3
30 40.00 -60 to 270/290 19095P-QO4
Particle Traps for Use with PLOT Columns
Though highly stabilized, it is impossible to guarantee that no particles will dislodge from the
column wall. When used in valve-switching applications, the use of a particle trap can prevent
scarring of the rotors.
Particle Traps for Use with PLOT Columns
ID (mm) Length (m) Part No.
0.32 2.5 5181-3351
0.53 2.5 5181-3352
GC and GC/MS
289