TABLE OF CONTENTS - BGB Analytik AG

ICP-MS
Instrument Parts and Supplies
Nebulizers and Nebulizer Supplies
Description Specs Use Unit Part No.
Sample tubing 0.25 mm ID, 700 mm, with
Connector
For MicroMist Nebulizer 10/pk G3266-80010
Sample tubing 0.5 mm ID, 700 mm, with Connector For MicroMist Nebulizer 10/pk G3266-80011
Carrier gas connector For MicroMist Nebulizer G3266-80015
MicroMist Nebulizer Borosilicate glass Standard on 7500cx/ce. When
ordered for the 7500a, the spray
chamber end cap (G1833-65475)
is also required (included on the
7500cx/ce/cs).
G3266-65003
Nebulizer cleaner For MicroMist Nebulizer G3266-80020
Mira Mist Nebulizer PEEK For high solids applications such as
environmental, geological, etc.
Not for semiconductor use since it
does not self aspirate. When ordered
for the 7500a, the spray chamber
end cap (G1833-65475) is also
required (included with 7500cx/cs).
G3161-80001
Babington Nebulizer Includes Viton O-ring, PTFE sample
tubing, and connector
End cap for Babington Nebulizer,
polypropylene
820 www.agilent.com/chem/supplies
Use to introduce samples with high
matrix and high total salts. Clean
when contaminated or when orifices
are clogged.
Includes Viton O-rings Replace when memory effects do not
disappear after cleaning. Insert
nebulizer in middle of end cap all the
way through. Attach end cap to spray
chamber with "TOP" mark facing up.
G1820-60453
G1833-65476
Babington Nebulizer removal tool G1820-65345
Concentric Nebulizer, Pyrex Use with P/N G1820-65052 Use with clean samples only.
G1820-65030
Argon gas connector,
Not resistant to hydrochloric acid.
P/N G1820-60160 Connector kit,
P/N G1820-65121 end cap
Clean with a 5% HNO3 (v/v) bath;
do not use ultrasonic bath.