TABLE OF CONTENTS - BGB Analytik AG

General Chromatography
Gas Purification Systems
Gas filter base plate design
Super Clean Gas Purification system
Super Clean Gas Purification Systems
Super Clean gas filter systems are designed to provide the utmost in convenience and
contamination reduction. The system is tested for leak-tightness and the glass and metal
construction of the cartridges eliminates diffusion of contaminants into the gas stream.
During cartridge replacement, check valves close off the system to the atmosphere, further
minimizing the entry of contaminants.
78 www.agilent.com/chem/supplies
Filter systems are available in several configurations, including 3 and 4 cartridge systems
for GCs equipped with Flame Ionization Detectors (FIDs). Additionally, baseplates are available
for 2, 3, or 4 filters, allowing the user to design a gas filter system for any application. Unit is
ready to connect with 1/8 in. tubing. Maximum pressure is 150 psi (11 bar).
• Triple filter cartridge for carrier gas purification with a single cartridge
• Fuel gas filter for removal of hydrocarbons and moisture from FID fuel gases
• The filter's gas flow path is made from high quality glass and stainless steel
• Filters can be changed easily, without tools
• Base plate design allows customization for your gas filtration needs
• Indicating action tells when to replace cartridges
Specifications
Max pressure 150 psi (11 bar)
Dimensions 33 cm x 31 cm x 11 cm – 4 filter system
Weight 8 kg
Purity Level < 0.1 ppm at max flow rate of 2 L/min (max pressure 10 bar)