TABLE OF CONTENTS - BGB Analytik AG

GC and GC/MS
294
Non-Bonded Stationary Phases
DX-1 and DX-4
• DX-1: 90% Dimethylpolysiloxane - 10% Polyethylene Glycol
• DX-4: 15% Dimethylpolysiloxane - 85% Polyethylene Glycol
Because DX series GC columns are not bonded and cross-linked, we do not recommend
solvent rinsing.
DX-1
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.32
DX-4
30 1.00 50 to 250/270 123-6133
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.25 30 0.25 50 to 250/270 122-6432
60 0.25 50 to 250/270 122-6462
0.32 15 0.25 50 to 250/270 123-6412
30 0.25 50 to 250/270 123-6432
60 0.25 50 to 250/270 123-6462
SE-30 and SE-54
• SE-30: 100% Dimethylpolysiloxane
• SE-54: (5%-Phenyl)(1%-Vinyl)-methylpolysiloxane
Because SE series GC columns are not bonded or cross-linked, we do not recommend
solvent rinsing.
SE-30
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.32 30 0.25 0 to 325/350 113-3032
SE-54
ID (mm) Length (m) Film (µm) Temp Limits (°C) Part No.
0.25 30 0.25 0 to 325/350 112-5432
60 0.25 0 to 325/350 112-5462
0.32 30 0.25 0 to 325/350 113-5432
www.agilent.com/chem/supplies