TABLE OF CONTENTS - BGB Analytik AG

LC and LC/MS
Pump Supplies
Active inlet valve, G1312-60025
Solvent mixer, 5067-1565
G1312B 1200 Series Binary Pump SL
514 www.agilent.com/chem/supplies
Description Part No.
PM Kit for binary pump, includes 4 piston seals, PTFE frits, 3 gold seals, 2 sieves
and 3 outlet caps
G1312-68730
Pump configuration kit for G1312B
Needs G1158B 2 Position / 6 Port valve. Includes side cover with fixed rail, top
and right cover for pump housing, plus 6 connecting capillaries. This allows
automatic switching between different delay volumes to optimize the system for
2.1 mm ID or 4.6 mm ID columns.
G1312-68726
Side and top cover bin pump, valve rail 5042-1567
Flex capillary, 0.17 x 280 mm, no fittings 5021-1818
Column connecting capillary with fittings, 9 cm, 0.17 mm ID, 1/16 in. male/male G1316-87300
Stainless steel capillary, 230 x 0.17 mm, m/m, p-s/p-s 5067-1570
Stainless steel capillary, 320 x 0.17 mm, m/m, p-s/p-s 5067-1571
Stainless steel capillary, 150 x 0.17 mm, m/f, pre-swaged 5067-1572
Active inlet valve, without cartridge G1312-60025
Cartridge for active inlet valve, 600 bar G1312-60020
Outlet valve for binary SL pump, 600 bar G1312-60022
Purge valve assembly, 600 bar G1312-60023
Seal keeper, ceramic 5042-8586
Seal keeper, ceramic, hipped 5042-8952
Stainless steel capillary 400 x 0.17 mm, m/m, ps/ps pump to autosampler G1312-87303
Stainless steel capillary 700 x 0.17 mm, m/m, ps/ps pump to cooled ALS G1312-87304
Stainless steel capillary 150 x 0.17 mm, m/m, ps/ps damper to pressure sensor G1312-87305
Stainless steel capillary 105 x 0.17 mm, m/m, ps/ps damper to mixer or mixer to
outlet valve
G1312-87306
Calibration capillary assembly G1312-67500
Absorber capillary, 500 µL G1312-87300
Stainless steel restriction capillary, 0.17 mm ID, T-piece to pressure sensor G1312-87301
Solvent mixer, short, 200 µL 5067-1565
G1376A/G1382A 1100/1200 Series Capillary Pump
Description Part No.
Capillary pump accessories kit G1376-68705
Capillary pump PM kit G1376-68710
Semi prep filter 5064-8273
Replacement frits, 0.5 µm, for P/N 5064-8273 5022-2185
Torque wrench adapter G1315-45003
Bottle head assembly with tubing and filter G1376-60003
Solvent inlet filter, stainless steel 01018-60025
Stainless steel capillary, pump-ALS 90 cm, 0.17 mm ID G1329-87300
Extended flow range kit, 100 µL/min G1376-68707