Brocade MLX Series and Brocade NetIron XMR Hardware ...

Installing a Brocade MLXe-16 router 2FIGURE 61Installing a power supply in a Brocade MLXe-16 routerCAUTIONCarefully follow the mechanical guides on each side of the power supply slot and make sure thepower supply is properly inserted in the guides. Never insert the power supply upside down.4. Push the power supply front panel toward the back of the router. This action causes the powersupply connector to engage the backplane connector.NOTEDo not overtighten screws when installing power supplies.5. For information about connecting power to the router, refer to “Connecting AC power”.6. For information about powering on the system, refer to “Activating the power source” onpage 141.Connecting AC powerNOTEFor the NEBS-compliant installation, AC power connections must use a surge protection device(SPD) to protect the AC power supplies from damage due to excessive power line surges.AC power is supplied through a power cord connected to the power supply in the Brocade MLXe-16router.Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide 9753-1002373-02