Brocade MLX Series and Brocade NetIron XMR Hardware ...

Hardware specifications for Brocade NetIron XMR routers 9Safety agency approvals• CAN/CSA-C22.2 No. 60950-1-07/UL60950-1 – Second Edition, Safety of InformationTechnology Equipment• EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification, Requirements andUser’s Guide• EN 60825-2 Safety of Laser Products – Part 2: Safety of Optical Fibre CommunicationsSystems• EN 60950-1:2006\IEC 60950-1:2005, Second Edition, Safety of Information TechnologyEquipmentElectromagnetic approvals• FCC Part 15, Subpart B (Class A)• EN 55022 (CE mark) (Class A)• EN 55024 (CE mark) (Immunity) for Information Technology Equipment• ICES-003 (Canada) (Class A)• AS/NZ 55022 (Australia) (Class A)• VCCI (Japan) (Class A)• EN 61000-3-2• EN 61000-3-3• EN 61000-6-1Hardware specifications for Brocade NetIron XMR routersThe following sections describe hardware specifications for Brocade NetIron XMR routers.Power specificationsThe following power supply frequency requirements apply to Brocade NetIron XMR 4000, 8000,and 16000 routers:• AC Input Rating: 100 to 240V, 50/60 Hz, 16.0 A maximum per power supply• AC Operating Voltage Range: 90 - 264V, 50/60 Hz• Inrush current: 40A peak maximum at 25 degrees C (77 degrees F)• DC Input Rating: -48V, 30.0 A maximum per power supply• DC Operating Range: -40 to -60V• Inrush current: 45A peak maximum at 25 degrees C (77 degrees F)The following power supply frequency requirements apply to Brocade NetIron XMR 32000 routers:• AC Input Rating: 200 -240V, 50/60 Hz, 16.0 A maximum per power supply• AC Operating Voltage Range: 180-264V• Inrush current: 30A peak maximum at 25 degrees C (77 degrees F)• DC Input Rating: -48V, 60.0 A maximum per power supply• DC Operating Range: -40 to -60VBrocade MLX Series and Brocade NetIron XMR Hardware Installation Guide 38753-1002373-02