Brocade MLX Series and Brocade NetIron XMR Hardware ...

4Installing a Brocade NetIron XMR 16000 routerInstalling a Brocade NetIron XMR 16000 routerThis section describes how to install a Brocade NetIron XMR 16000 router.Preparing the installation siteBefore installing the router, plan the location and orientation relative to other devices andequipment. For cooling purposes, allow a minimum of six inches of space between the sides, front,and the back of the router and walls or other obstructions. If a router is installed in a perforatedenclosure, the perforations must cover at least 60 percent of the surface.Ensure that the proper power and network cabling is installed in the site. For information oncabling, refer to “Installing power supplies in a Brocade NetIron XMR 16000 router” on page 268,and “Attaching a management station” on page 296.Unpacking a Brocade NetIron XMR 16000 routerThe Brocade NetIron XMR 16000 router ships with the following items:• Router chassis with the appropriate number of switch fabric modules installed in slots markedSF, and slot blanks installed in all empty slots.• Insertion or extraction tool for use with RJ45 and fiber-optic connectors.If any items are missing, contact the place of purchase.Follow these steps to unpack a Brocade NetIron XMR 16000 router.1. Remove the router from the shipping carton and all packing materials.2. Save the shipping carton and packing materials in case you need to move or ship the router ata later time.Lifting guidelines for Brocade NetIron XMR 16000 routersDANGERA fully-populated Brocade NetIron XMR 16000 router is heavy. TWO OR MORE PEOPLE AREREQUIRED WHEN LIFTING, HANDLING, OR MOUNTING THESE DEVICES.Follow these guidelines for lifting and moving a Brocade NetIron XMR 16000 router:• Before lifting or moving the router, disconnect all external cables.• Do not attempt to lift a fully configured router by yourself. If possible, use a mechanical lift tomaneuver the router into a rack. If a lift cannot be used, a minimum of two people must lift therouter, and you must remove components from the router before lifting.262 Brocade MLX Series and NetIron XMR Hardware Installation Guide53-1002373-02