Brocade MLX Series and Brocade NetIron XMR Hardware ...

Installing a Brocade NetIron XMR 8000 router 4Unpacking a Brocade NetIron XMR 8000 routerThe Brocade NetIron XMR 8000 router ships with the following items:• Router chassis with the appropriate number of switch fabric modules already installed in theslot marked SF and a slot blank installed in all other module slots.• Insertion or extraction tool for use with RJ45 and fiber-optic connectors.If any items are missing, contact the place of purchase.Follow these steps to unpack a Brocade NetIron XMR 8000 router.1. Remove the router from the shipping carton and packing materials.2. Save the shipping carton and packing materials in case you need to move or ship the router ata later time.Removing the shipping screwsThe Brocade NetIron XMR 8000 router ships with two shipping screws installed in the right side ofthe router. These screws secure the fan tray, protecting it from damage during shipment. You mustremove these screws before installing the router. Figure shows the location of the screws.To perform this task, you need a #2 Phillips screwdriver.FIGURE 176 Shipping screw locations1 231 Router front 2 Router back 3 Shipping screwsLifting guidelines for Brocade NetIron XMR 8000 routersDANGERA fully-populated Brocade NetIron XMR 8000, router is heavy. TWO OR MORE PEOPLE AREREQUIRED WHEN LIFTING, HANDLING, OR MOUNTING THESE DEVICES.Follow these guidelines for lifting and moving a Brocade NetIron XMR 8000 router:• Before lifting or moving the router, disconnect all external cables.• Do not attempt to lift a fully configured router by yourself. Use two people to lift the router, andremove components from the router before lifting.Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide 25353-1002373-02