Brocade MLX Series and Brocade NetIron XMR Hardware ...

Installing a Brocade MLX-32 router 3FIGURE 141Slide the device into the rack211 Align bottom of router slightly above the seat of the saddle using mechanical lift.2 Using at least two people, slide router gently onto saddle and into the rack.4. Use the provided standard #12-24, #10-32 or M6 pan head screws (dependent on thespecifications of your rack) in each available hole on the rack mount bracket to attach therouter to the rack mounting poles. See Figure 142.5. Visually inspect the alignment of the router. If the router is installed properly, the mountingscrews on both sides rack should be aligned with the mounting screws on the opposite sideand the router should be level.Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide 20353-1002373-02