Brocade MLX Series and Brocade NetIron XMR Hardware ...

2Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet4. Attach the side plates to the rear of the router, using eight 6-32 flat-head screws. Refer toFigure 65.FIGURE 65Attach side plates to the rear of the router (MLXe-4 shown)BBAAThere are two sizes of side plates to accommodate cabinets or racks with depths of 27-28inches, and depths of 29-31 inches. Be sure to select the side plate that is appropriate for yourcabinet or rack.5. The mounting shelf adjusts to accommodate racks with depths from 27 to 31 inches, for both4-slot and 8-slot routers. Slide the adjustable rails to the proper depth for your installation, andInstall the mounting shelf to the rack rails using eight 10-32 screws. Refer to Figure 66.FIGURE 66Install the mounting shelf in the rack102 Brocade MLX Series and NetIron XMR Hardware Installation Guide53-1002373-02