Brocade MLX Series and Brocade NetIron XMR Hardware ...

9Port specifications for all router modelsStorage environmentTable 66 provides the storage environment specifications for the Brocade NetIron XMR routers.TABLE 66 Brocade NetIron XMR router storage environment requirementsStorage temperature Storage humidity Storage altitude(-25° – 70° C) -13°– 158°F 95% maximum relative humidity,non-condensing(0 – 4500 meters) 0 – 15,000 ftSafety agency approvals• CAN/CSA-C22.2 No. 60950-1-07/UL60950-1 – Second Edition, Safety of InformationTechnology Equipment• EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification, Requirements andUser’s Guide• EN 60825-2 Safety of Laser Products – Part 2: Safety of Optical Fibre CommunicationsSystems• EN 60950-1:2006\IEC 60950-1:2005, Second Edition, Safety of Information TechnologyEquipmentElectromagnetic approvals• FCC Part 15, Subpart B (Class A)• EN 55022 (CE mark) (Class A)• EN 55024 (CE mark) (Immunity) for Information Technology Equipment• ICES-003 (Canada) (Class A)• AS/NZ 55022 (Australia) (Class A)• VCCI (Japan) (Class A)• EN 61000-3-2• EN 61000-3-3• EN 61000-6-1Port specifications for all router modelsThis section describes port specifications for all router models.Console port pin assignmentsThe console port is a standard male DB-9 connector, as shown in Figure 252. For informationabout how you can use this port, refer to “Console port” on page 20.390 Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide53-1002373-02