13.07.2015 Views

Brocade MLX Series and Brocade NetIron XMR Hardware ...

Brocade MLX Series and Brocade NetIron XMR Hardware ...

Brocade MLX Series and Brocade NetIron XMR Hardware ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Enabling <strong>and</strong> disabling management module CPU usage calculations 7<strong>Brocade</strong># power-on lp 1To re-enable power on all interface modules, enter the following comm<strong>and</strong>.<strong>Brocade</strong># power-on lp allIn this output example, there is one interface module in slot 3 <strong>and</strong> slot 3 is powered on.<strong>Brocade</strong># power-on lp allSlot 3 is powering on.rw_power_on_lp: write 00070004 to RW_MBRIDGE_CARD_POWER_OFF_REGSyntax: power-on lp [| all]• The parameter indicates the slot number for which you are re-enabling thepower. You can specify 1 – 4 for 4-slot routers, 1 – 8 for 8-slot routers, 1 – 16 for 16-slotrouters, or 1 – 32 for 32-slot routers.• The all parameter allows you to power on all interface modules.Enabling <strong>and</strong> disabling management module CPU usage calculationsYou can enable the router to perform usage averaging calculations on tasks h<strong>and</strong>led by CPU on themanagement module. You can then display usage averages for all tasks performed by the CPU onthe management module for an interval of up to one hour. You can display these statistics usingthe show cpu comm<strong>and</strong>.NOTETypically, these statistics are used for debugging purposes.By default, the performance of the calculations is disabled. When disabled, you can use the showcpu comm<strong>and</strong> without optional parameters to display usage averages for all tasks performed byCPU on the management module.NOTEThe cpu-usage comm<strong>and</strong> must be configured in order to poll the MP CPU utilization.To enable the usage averaging calculations, enter the following comm<strong>and</strong> at the global CONFIGlevel of the CLI.<strong>Brocade</strong>(config)# cpu-usage onSyntax: cpu-usage onTo disable the usage averaging calculations, enter the following comm<strong>and</strong> at the global CONFIGlevel of the CLI.<strong>Brocade</strong>(config)# cpu-usage offSyntax: cpu-usage offNOTEWhen you are finished gathering statistics for debugging purposes, it is recommended that youdisable the usage averaging calculations, which are CPU-intensive <strong>and</strong> can affect the performanceof the management module.<strong>Brocade</strong> <strong>MLX</strong> <strong>Series</strong> <strong>and</strong> <strong>Brocade</strong> <strong>NetIron</strong> <strong>XMR</strong> <strong>Hardware</strong> Installation Guide 34553-1002373-02

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!