Brocade MLX Series and Brocade NetIron XMR Hardware ...

1Router modulesSYSLOG: May 28 16:22:35:May 28 16:22:35 System: Module was inserted to slot 7Module 7 is -d class, it can't work when router mpls is enabled.Reset slot 7SYSLOG: May 28 16:22:48 :May 28 16:22:48 Module 7 is reset by mgmt (reason:boot to interactive mode)Power supply requirements for NI-MLX-10Gx8-M and NI-MLX-10Gx8-D modulesTable 14 lists the power supply requirements for each type of router when installing Gen-2 8-port10 Gbps interface modules (NI-MLX-10Gx8-M and NI-MLX-10Gx8-D).TABLE 14Router typePower supply requirements for Gen-2 8-port 10 Gbps interface modulesNumber of Gen-28-port 10 Gbpsinterface modulesinstalledPower supply requirementsMLXe-4 three one 1200W PSUfor 1+1 redundancy, install two 1200W PSUMLX-4 andBrocade NetIronXMR 4000fourfourtwo 1200W PSUfor 2+2 redundancy, install four 1200W PSUone 1200W PSUfor 1+1 redundancy, install two 1200W PSUMLXe-8 seven two 1200W PSUfor 2+2 redundancy, install four 1200W PSUBrocade NetIronXMR 8000eighteightthree 1200W PSUfor 3+1 redundancy, install four 1200W PSUtwo 1200W PSUfor 2+2 redundancy, install eight 1200W PSUAll 16-slot routers sixteen four 1200W PSUfor 4+4 redundancy, install eight 1200W PSUAll 32-slot routers thirty-two four 2400W PSUfor 4+4 redundancy, install eight 2400W PSU24-port 1 Gbps Ethernet copper RJ45 interface moduleThe 24-port 1 Gbps Ethernet copper interface module is available in the following formats:• BR-MLX-1GCx24-X-ML• BR-MLX-1GCx24-XThis module has 32 Mb of flash memory and contains 24 RJ45 physical ports, through which youcan connect your router to other network routers. BR-MLX-1GCx24-X-ML support s up to 512K IPv4routes in hardware and BR-MLX-1GCx24-X version supports up to 1M IPv4 routes in hardware.BR-MLX-1GCx24-X-ML does not include a software license, but can be upgraded to an X versionthrough a software license. Please contact Brocade to purchase the license upgrade.36 Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide53-1002373-02