Brocade MLX Series and Brocade NetIron XMR Hardware ...

Router modules 1Gen-1 10Gx2 and 10Gx4 Ethernet interface modulesGen-1 2-port and 4-port 10 Gbps Ethernet interface modules are available in the following formats:• NI-MLX-10Gx2 - 2-port interface module for MLX devices• NI-XMR-10Gx2 - 2-port interface module for XMR devices• NI-MLX-10Gx4 - 4-port interface module for MLX devices• NI-XMR-10Gx4 - 4-port interface module for XMR devicesNOTEWhen you install Gen-1 2-port or 4-port 10 Gbps Ethernet interface modules, you must upgrade thesoftware on all interface modules and management modules to the appropriate software release.For more information on the appropriate software release refer to the Hardware Installation Notesthat shipped with the interface module.Figure 17 shows Gen-1 2-port and 4-port 10 Gbps Ethernet interface module front panels.FIGURE 17Gen-1 2-port and 4-port 10 Gbps Ethernet module front panelsLnk1 2LnkActiveActiveLnk1 2 3 4LnkLnkLnkActiveActiveActiveActiveThe front panel of the 2-port module includes the following features:• Two LEDs per port (as described in Table 9)• Two 10 Gbps Ethernet XFP optics portsThe front panel of the 4-port module includes the following features:• Two LEDs per port (as described in Table 9)• Four 10 Gbps Ethernet XFP optics ports10 Gbps Ethernet interface module LEDsGen-1 2-port and 4-port interface modules have LEDs that indicate the status of each port, asdescribed in Table 9.TABLE 9Gen-1 2-port or 4-port 10 Gbps Ethernet module LEDsLED Location State MeaningLinkLeft of eachEthernet portOnOffA link is established with the remote port.A link is not established with the remote port.ActiveLeft of eachEthernet portOnOffThe port is transmitting and receiving packets.The port is not transmitting or receiving packets.Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide 2953-1002373-02