Brocade MLX Series and Brocade NetIron XMR Hardware ...

2Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet8. Install the router in the cabinet or rack. The router slides into the rack on top of the mountingshelf. Secure the router to the rack rails using eight 10-32 screws. Refer to Figure 69 (MLXe-4slot router shown).FIGURE 69Install the router on the mounting shelf9. Install the transport brackets to the cabinet or rack rails and to the side plates on the router,using six 10-32 screws. Refer to Figure 70.NOTEThe transport brackets provide extra stability, and must be installed if you plan to ship the devicewhile it is mounted in the cabinet or rack. Before you install the transport brackets, you must firstremove any installed fans.FIGURE 70Attach transport brackets to router and to cabinet or rack104 Brocade MLX Series and NetIron XMR Hardware Installation Guide53-1002373-02