Brocade MLX Series and Brocade NetIron XMR Hardware ...

7Managing switch fabric modulesForcing HSF modules to operate in normal modeNOTEThis procedure requires that you restart your router.If necessary, you can configure HSF modules to operate in normal mode using the system-initfabric-data-mode force normal command.Brocade(config)# system-init fabric-data-mode force-normalSyntax: [no] system-init fabric-date-mode force-normalIf you remove the forced normal condition using the no version of this command, you must enterthe write-memory command and restart the router.Blocking discovery of G1 switch fabric modulesNOTEThis procedure requires that you restart your router.In a router with both standard (G1) switch fabric modules and G2 HSF modules, you can block thediscovery of the G1 switch fabric modules by entering the system-init block-g1-sfm command.Syntax: system-init block-g1-sfmAfter you enter this command, enter the write -memory command and restart the router.330 Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide53-1002373-02