Brocade MLX Series and Brocade NetIron XMR Hardware ...

2Installing a Brocade MLXe-8 routerInstalling a Brocade MLXe-8 routerThis section describes how to install a Brocade MLXe-8 router.NOTEIllustrations in this chapter may differ slightly from the actual equipment.Preparing the installation siteBefore installing the router, plan the location and orientation relative to other devices andequipment. For cooling purposes, allow a minimum of six inches of space between the sides, front,and the back of the router and walls or other obstructions. If a router is installed in a perforatedenclosure, the perforations must cover at least 60 percent of the surface.NOTEThis equipment is suitable for installation in a Network Telecommunication facility and where NECrequirements apply. Additionally, it may be installed in either a Common Bonding Network (CBN) orIsolated Bonding Network (IBN). It is not intended for Outside Plant (OSP) installations.Ensure that the proper cabling is installed at the site.For information on cabling, refer to “Installing power supplies in the Brocade MLXe-8 router” onpage 85, “Attaching a management station” on page 140, and “Connecting the router to a networkdevice” on page 317.Unpacking a Brocade MLXe-8 routerThe Brocade MLXe-8 router ships with the following items:• Switch fabric modules installed in slots marked SF, and slot blanks installed in all emptymodule slots.• Two AC or two DC power supplies• Insertion or extraction tool for use with RJ45 and fiber-optic connectors.Save the shipping carton and packing materials in case you need to move or ship the router at alater time.Lifting guidelines for Brocade MLXe-8 routersFollow these guidelines for lifting and moving Brocade MLXe-8 routers:• Before lifting or moving the router, disconnect all external cables.• Do not attempt to lift a fully configured router by yourself.• It is recommended that you install router components after you have installed the router in arack.Installing a Brocade MLXe-8 router in a rackBecause of the weight of a fully loaded Brocade MLXe-8 router, Brocade recommends mounting itin a rack before installing the modules and AC power supplies.80 Brocade MLX Series and NetIron XMR Hardware Installation Guide53-1002373-02