13.07.2015 Views

Brocade MLX Series and Brocade NetIron XMR Hardware ...

Brocade MLX Series and Brocade NetIron XMR Hardware ...

Brocade MLX Series and Brocade NetIron XMR Hardware ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Router modules 1The front panel includes the following features:• LEDs to the left support the top ports, LEDs to the right support the bottom ports• 20 100/1000 Ethernet SFP portsTable 19 describes the LEDs for the 20-port 100/1000 Ethernet moduleTABLE 1920-port 100/1000 Ethernet module LEDsPosition State MeaningBelow each Ethernet port.(Left-side LED supports port intop row. Right-side LED supportsport in bottom row.)On or blinkingOff for an extended periodThe port is transmitting <strong>and</strong> receiving packets.The port is not transmitting or receiving packets.100/1000 Ethernet portsThe 100/1000 Ethernet interface module contains 20 physical ports, through which you canconnect your router to other network routers at a speed of 100 Mbps or 1 Gbps.You must insert an SFP-compliant fiber-optic transceiver (provided by <strong>Brocade</strong>) into a physical port.SFP-compliant fiber-optic transceivers provide a physical medium-dependent (PMD) fiber interfacethat can be used with either the LAN physical layer (PHY) or WAN physical layer (WAN PHY).For a list of SFP optics supported by <strong>Brocade</strong>, refer to the latest version of the <strong>Brocade</strong> OpticsFamily Data Sheet, available online in the following location:http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/Optics_DS.pdf20-port 10/100/1000 Ethernet interface moduleFigure 24 shows the front panel of the 20-port 10/100/1000 Ethernet RJ45 module.FIGURE 2420-port 10/100/1000 copper Ethernet interface module front panelThe front panel includes the following features:• LEDs• Twenty 10/100/1000 copper Ethernet ports.Table 20 describes the 20-port 10/100/1000 Ethernet module LEDs.TABLE 20 20-port 10/100/1000 Ethernet module LEDsLED Position State MeaningLink orActiveAbove the ports. The topport LED is on the left side,the bottom port LED is onthe right side.On (solid)BlinkingOffA link is established with the remote port (with no traffic).The port is transmitting <strong>and</strong> receiving packets.A link is not established with the remote port <strong>and</strong> no traffic isbeing passed.<strong>Brocade</strong> <strong>MLX</strong> <strong>Series</strong> <strong>and</strong> <strong>Brocade</strong> <strong>NetIron</strong> <strong>XMR</strong> <strong>Hardware</strong> Installation Guide 4153-1002373-02

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!