Brocade MLX Series and Brocade NetIron XMR Hardware ...

2Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinetFinal stepsComplete these steps in the order listed:• “Attaching a management station”• “Activating the power source”• “Verifying proper operation”Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack orcabinetTABLE 30Cabinet or 4-Post Rack Mount Kit contentsYou can mount Brocade MLXe routers in a cabinet or 4-post rack using the optional cabinet/4-postrack mount kits available from Brocade. Table 30 lists these kits, and their contents.Cabinet/4-Post Rack Mount Kits for Brocade MLXe-4, MLXe-8, and MLXe-16 routersContents for RMK-CAB-MLXE-4 Contents for RMK-CAB-MLXE-8 Contents for RMK-CAB-MLXE-16Front bracket left A (1)Front bracket right B (1)Left side plate A (1)Right side plate (B 1)2U shelf assembly (1)Adjustable top rail (1)Rail extender for top rail, 27-29” (1)Rail extender for top rail, 29-31” (1)Thermal duct (1)Right transport bracket, 27-29” (1)Left transport bracket, 27-29” (1)Right transport bracket, 29-31” (1)Left transport bracket, 29-31” (1)Alignment washers (4)Phillips pan-head screws, 10-32x.63”, squarecone (30)Floating clip nut, 10-32 (26)Retainer nut, 10-32 (26)Snap plastic rivets (12)Phillips flat-head screws, 6-32x1/4” (10)Screws, 6-32, 1/4” Phillips flat-head, zinc,black (18)Screws, 10-32, 1/4” Phillips flat-head,100Deg, steel, black (16)Front bracket left A (1)Front bracket right B (1)Left side plate A (1)Right side plate B (1)2U shelf assembly (1)Adjustable top rail (1)Rail extender for top rail, 27-29” (1)Rail extender for top rail, 29-31” (1)Thermal duct (1)Right transport bracket, 27-29” (1)Left transport bracket, 27-29” (1)Right transport bracket, 29-31” (1)Left transport bracket, 29-31” (1)Alignment washers (4)Phillips pan-head screws, 10-32x.63”, squarecone (30)Floating clip nut, 10-32 (26)Retainer nut, 10-32 (26)Snap plastic rivets (12)Phillips flat-head screws, 6-32x1/4” (10)Screws, 6-32, 1/4” Phillips flat-head, zinc,black (18)Screws, 10-32, 1/4” Phillips flat-head,100Deg, steel, black (16)Front bracket left A (1)Front bracket right B (1)Left side plate A (1)Right side plate B (1)Chassis alignment rail ((1)Air block shelf (1)Phillips flat-head screws, 6-32x1/4” (10)Snap plastic rivets (12)Right transport bracket, 27-29” (1)Left transport bracket, 27-29” (1)Right transport bracket, 29-31” (1)Left transport bracket, 29-31” (1)Alignment washers (4)Phillips pan-head screws, 10-32x.63”,square cone (30)Floating clip nut, 10-32 (26)Retainer nut, 10-32 (26)Screws, 6-32, 1/4” Phillips flat-head, zinc,black (18)Screws, 10-32, 1/4” Phillips flat-head,100Deg, steel, black (16)Installing Brocade MLXe-4 and Brocade MLXe-8 routers in a cabinet or 4-postrackThis section describes how to install Brocade MLXe-4 or MLXe-8 routers in a cabinet or a 4-postrack using the RMK-CAB-MLXE-4 or RMK-CAB-MLXE-8 Cabinet/4-Post Rack Mount Kits.100 Brocade MLX Series and NetIron XMR Hardware Installation Guide53-1002373-02