Brocade MLX Series and Brocade NetIron XMR Hardware ...

Installation precautions 4CAUTIONUse a separate branch circuit for each AC power cord, which provides redundancy in case one ofthe circuits fails.DANGERMake sure to choose the appropriate circuit device, depending on the number of AC powersupplies installed in the router.DANGERDisconnect the power cord from all power sources to completely remove power from the router.DANGERMake sure that the power source circuits are properly grounded, then use the power cordsupplied with the router to connect it to the power source.DANGERIf the installation requires a different power cord than the one supplied with the router, makesure you use a power cord displaying the mark of the safety agency that defines the regulationsfor power cords in your country. The mark is your assurance that the power cord can be usedsafely with the router.DANGERMake sure the rack or cabinet housing the router is adequately secured to prevent it frombecoming unstable or falling over.DANGERMount the routers you install in a rack or cabinet as low as possible. Place the heaviest router atthe bottom and progressively place lighter routers above.Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide 23753-1002373-02