Brocade MLX Series and Brocade NetIron XMR Hardware ...

1Router modulesFIGURE 288-port OC-12c and OC-48c POS interface module1 2 4 6 8 10 11Power1 3 5 72 4 6 81 2 3 4 Active /Local FailTx Pkt5 6 7 8Rx PktCarrier Rcvd /Remote FailINOU TBITS1BITS2INOU T3 5 7 91 Power 4 Port 3 7 Port 6 10 Port status LEDs2 Port 1 5 Port 4 8 Port 7 11 BITS clocking ports3 Port 2 6 Port 5 9 Port 8Single-Speed OC-192c POS interface modulesThe front panel of the single-speed OC-192c POS interface modules contain the following features:• One or two ports that accommodate XFP optics.• An LED that indicates if power is being received by the module.• Four LEDs per port that indicate the following port status: Active or Local Rail, TX Pkt, RX Pkt,and Carrier Rcvd or Remote Fail.• Two IN and two OUT RJ-48C connectors to provide a BITS external clock source and topropagate a common clock source (Line or BITS) among POS modules.Figure 29, and Figure 30 illustrate these features.FIGURE 291-port OC-192c POS interface module1 2 3 4Power1Active /Local FailTx PktRx PktCarrier Rcvd /Remote FailINOU T1 I N O UTBITS1BITS21 Power 2 Port 1 3 Port status LEDs 4 ZBITS clocking portsFIGURE 302-port OC-192c POS interface module1 2 3 4 5Power1 2Active /Local FailTx PktRx PktCarrier Rcvd /Remote FailINOU T1 2 I N O UTBITS1BITS21 Power 2 Port 1 3 Port 2 4 Port status LEDs 5 BITS clocking ports46 Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide53-1002373-02