Brocade MLX Series and Brocade NetIron XMR Hardware ...

Managing the device 7To display this information, enter the show chassis command at any level of the CLI.Brocade# show chassis*** Brocade MLX-4 chassis ***---POWERS ---Power 1 (32011000 - AC 1200W): Installed (OK)Power 2: not presentPower 3: not presentTotal power budget for device = 1200 WTotal power used by system core = 183 WTotal power used by LPs = 386 WTotal power available = 631 WSlot Power-On Priority and Power Usage:Slot1 pri=1 module type=NI-MLX-1Gx20-GC 20-port 10/100/1000 Copper Module powerusage=156WSlot4 pri=1 module type=NI-X-OC48x8 8-port OC48/12 STM16/STM4 Module powerusage=230W--- FANS ---right fan tray (fan 1): Status = OK, Speed = MED-HI (90%)right fan tray (fan 2): Status = OK, Speed = MED-HI (90%)--- TEMPERATURE READINGS ---Active Mgmt Module: 36.500C 49.625CStandby Mgmt Module: 36.250C 51.0CSNM1: 37.0CSNM2: 38.0CSNM3: not presentLP1 Sensor1: 41.5CLP1 Sensor2: 50.625CLP4 Sensor1: 39.0CLP4 Sensor2: 49.250CLP4 Sensor3: UNUSEDLP4 Sensor4: 38.5CLP4 Sensor5: 47.750CLP4 Sensor6: UNUSEDFans are in auto mode. Temperature Monitoring Poll Period is 60 secondsTable 46 describes the show chassis command output.TABLE 46FieldPowersshow chassis command outputDescriptionPower , The Power is the power supply number as positioned in the device. Thenumber of power supplies are as follows:4-slot devices: 1 – 38-slot devices: 1 – 416-slot devices: 1 – 832-slot devices: 1 – 8The is the part number of the power supply purchased. Thisapplies to AC and DC power supplies.Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide 32553-1002373-02