VisualDSP++ 4.5 Loader and Utilities Manual - Analog Devices

where:
� Command-line
File Searches
Loader/Splitter for Blackfin Processors
inputfile—Name of the executable (.dxe) file to be processed
into a single boot-loadable or non-bootable file. An input file name
can include the drive and directory. For multiprocessor or
multi-input systems, specify multiple input .dxe files. Put the
input file names in the order in which you want the loader utility
to process the files. Enclose long file names within straight quotes,
“long file name”.
-proc processor—Part number of the processor (for example,
-proc ADSP-BF531) for which the loadable file is built. Provide a
processor part number for every input .dxe if designing multiprocessor
systems.
-switch …—One or more optional switches to process. Switches
select operations and modes for the loader utility.
switches may be placed on the command line in
any order, except the order of input files for a multi-input system.
For a multi-input system, the loader utility processes the input files
in the order presented on the command line.
File searches are important in loader processing. The loader utility supports
relative and absolute directory names, default directories, and
user-selected directories for file search paths. File searches occur as
described on page 1-16.
VisualDSP++ 4.5 Loader and Utilities Manual 2-63