VisualDSP++ 4.5 Loader and Utilities Manual - Analog Devices

Using Base Loader
Loader/Splitter for Blackfin Processors
After selecting a Loader file as the target type on the Project page in VisualDSP++
Project Options dialog box, modify the default load settings.
Figure 2-38. Loader File Options Page for Blackfin Processors
The Load control in the Project Options tree control consists of multiple
pages. When you open the Load: Options page (also called loader property
page), view the default load settings for the selected processor. As an
example, Figure 2-38 shows the ADSP-BF535 processor’s default load settings
for PROM booting. The dialog box options are equivalent to
command-line switches. Refer to “Blackfin Loader Command-Line
Switches” on page 2-65 for more information about the switches.
VisualDSP++ 4.5 Loader and Utilities Manual 2-73