VisualDSP++ 4.5 Loader and Utilities Manual - Analog Devices

Splitter for SHARC and TigerSHARC Processors
Splitter Command-Line Switches
A list of the splitter command-line switches appears in Table 7-2.
Table 7-2. Splitter Command-Line Switches
Item Description
-64 The -64 (include DATA64 memory) switch directs the splitter utility to
extract all sections declared as 64-bit memory sections from the input
.dxe file. The switch influences the operation of the -ram and -norom
switches, adding 64-bit data memory as their target.
-dm The -dm (include data memory) switch directs the splitter utility to
extract memory sections declared as data memory ROM from the
input .dxe file. The -dm switch influences the operation of the -ram
and -norom switches, adding data memory as their target.
-o imagefile The -o (output file) switch directs the splitter utility to use imagefile
as the name of the splitter output file(s).
If not specified, the default name for the splitter output file
is inputfile.ext, where ext depends on the output format.
-norom The -norom (no ROM in PROM) switch directs the splitter utility to
ignore ROM memory sections in the inputfile when extracting
information for the output image. The -dm and -pm switches select
data memory or program memory. The operation of the -s switch is
not influenced by the -norom switch.
-pm The -pm (include program memory) switch directs the splitter utility
to extract memory sections declared program memory ROM from the
input.dxe file. The -pm switch influences the operation of the -ram
and -norom switches, adding program memory as the target.
VisualDSP++ 4.5 Loader and Utilities Manual 7-5