VisualDSP++ 4.5 Loader and Utilities Manual - Analog Devices

Loader/Splitter for Blackfin Processors
ADSP-BF534/BF536/BF537 TWI Slave Boot Mode
(BMODE = 110)
The I 2 C host agent selects the slave (Blackfin processor) with the 7-bit
slave address of 0x5F. The processor replies with an acknowledgement and
the host can then download the boot stream. The I 2 C host agent should
comply with Philips I2C Bus Specification version 2.1. The host device supplies
the serial clock (see Figure 2-23 and Figure 2-24).
Figure 2-23. TWI Slave Booting
Figure 2-24. TWI Slave Boot Mode
VisualDSP++ 4.5 Loader and Utilities Manual 2-29