VisualDSP++ 4.5 Loader and Utilities Manual - Analog Devices

hexutil – Hex-32 to S-Record File Converter
hexutil – Hex-32 to S-Record File
Converter
The hex-to-S file converter (hexutil.exe) utility transforms a loader
(.ldr) file in Intel hexadecimal 32-bit format to Motorola S-record format
or produces an unformatted data file.
Syntax: %hexutil input_file [-s1|s2|s3|StripHex] [-o file_name]
where:
input_file is the name of the .ldr file generated by the VisualDSP++
splitter utility.
Table B-1 shows optional switches used with the %hexutil command.
Table B-1. Hex to S-Record File Converter Command-Line Switches
Switch Description
-s1 Specifies Motorola output format S1
-s2 Specifies Motorola output format S2
-s3 Specifies the default output format – Motorola S3. That is, when no switch
appears on the command lines, the output file format defaults to S3.
-StripHex Generates an unformatted data file
-o Names the output file; in the absence of the -o switch, causes the output
file name to default to input_file.s.
The Intel hex-32 and Motorola S-record file formats are described
on page A-7 and on page A-11, respectively.
B-2 VisualDSP++ 4.5 Loader and Utilities Manual