VisualDSP++ 4.5 Loader and Utilities Manual - Analog Devices

Loader for TigerSHARC Processors
elfloader -p0.dxe -proc ADSP-TS101 -bprom -fhex -l Ts101_prom.dxe
In the above example, the command line runs the loader utility with:
p0.dxe—Identifies the executable file to process into a boot-loadable
file. Note the absence of the -o switch causes the output file
name to default to p0.ldr.
-proc ADSP-TS101—Specifies ADSP-TS101 as the processor type.
-bprom—Specifies EPROM booting as the boot type for the
boot-loadable file.
-fhex—Specifies Intel hex-32 format for the boot-loadable file.
-l TS101_prom.exe—Specifies the boot kernel file to be used for
the boot-loadable file.
elfloader -id2exe=p0.dxe -id3exe=p1.dxe -proc ADSP-TS101 -bprom
-fhex -l Ts101_prom.dxe
In the above example, the command line runs the loader utility with:
p0.dxe—Identifies the executable file for the processor with ID
of 2 to process into a boot-loadable file. Note the absence of the -o
switch causes the output file name to default to p0.ldr.
-p1.dxe—Identifies the executable file for the processor with ID
of 3 to process into a boot-loadable file.
-proc ADSP-TS101—Specifies ADSP-TS101 as the processor type.
-bprom—Specifies EPROM booting as the boot type for the
boot-loadable file.
-fhex—Specifies Intel hex-32 format for the boot-loadable file.
-l Ts101_prom.exe—Specifies the boot kernel file to be used for
the boot-loadable file.
VisualDSP++ 4.5 Loader and Utilities Manual 6-7