VisualDSP++ 4.5 Loader and Utilities Manual - Analog Devices

INDEX
multiprocessor systems (SHARC
processors)
ADSP-2106x/21160 processors, 3-23,
3-24
ADSP-21161 processors, 4-7, 4-21,
4-22, 4-23
ADSP-2136x/37x processors, 5-33
multiprocessor systems (TigerSHARC
processors), 6-6, 6-9
N
-no2kernel
loader switch for Blackfin, 2-69
no-boot mode
introduction to, 1-9, 1-12
See also internal boot mode
selecting with -romsplitter switch, 2-71
no-boot mode (Blackfin processors)
ADSP-BF531/2/3/4/6/7/8/9 processors,
2-17
ADSP-BF535 processors, 2-2
ADSP-BF561/6 processors, 2-43
selecting, 2-74, 2-79
no-boot mode (SHARC processors)
ADSP-2106x/160 processors, 3-2, 3-6,
3-16
ADSP-21161 processors, 4-2, 4-4, 4-16
NOBOOT (on software reset) bit, 2-19
-nokernel
loader switch for ADSP-2126x/36x/37x
processors, 5-46
loader switch for Blackfin, 2-70
loader switch for SHARC, 5-17
loader switch for TigerSHARC, 6-4,
6-10
non-bootable files
introduction to, 1-8, 1-9, 1-14
creating from command line, 7-2
creating from IDDE, 7-9
ignoring ROM sections, 7-5
specifying format, 7-6
specifying name, 7-5
specifying word width, 7-3, 7-6
NOP instruction, 3-4, 3-14, 3-19, 3-20,
4-6, 4-10, 4-13, 4-15, 5-21
-norom, splitter switch, 7-5
numeric formats, A-3
O
-o2, loader switch for Blackfin, 2-67, 2-70
object files (.doj), A-5
-o filename
loader switch for Blackfin, 2-69
loader switch for SHARC, 3-30, 4-30,
5-46
loader switch for TigerSHARC, 6-10
splitter switch, 7-5
on-chip boot ROM
introduction to, 1-13
ADSP-BF531/2/3/4/6/7/8/9 processors,
1-14, 2-16, 2-19, 2-21, 2-25, 2-35,
2-40, 2-52
ADSP-BF535 processors, 2-2, 2-4, 2-6
ADSP-BF561/6 processors, 2-42, 2-44,
2-49, 2-50, 2-52, 2-54
output files
See also -o loader switch
generating kernel and application, 2-70
specifying format, 1-11, A-6
specifying name, 2-69, 6-10
specifying with -o switch, B-2
specifying word width, 2-72, 4-29
overlay compression, 5-39
overlay memory files (.ovl), 2-64, 6-8, A-6,
A-16
I-12 VisualDSP++ 4.5 Loader and Utilities Manual