VisualDSP++ 4.5 Loader and Utilities Manual - Analog Devices

external memory (SHARC processors)
ADSP-2106x/160 processors, 3-5, 3-6,
3-9, 3-10, 3-14, 3-16, 3-19, 3-22,
3-31
ADSP-21161 processors, 4-4, 4-16,
4-21, 4-31
ADSP-2126x/36x/37x processors), 5-6,
5-22, 5-25
external ports (SHARC processors)
ADSP-2106x/160 processors, 3-5, 3-7,
3-9, 3-11, 3-13, 3-14, 3-15, 3-18,
3-24
ADSP-21161 processors, 4-4, 4-5, 4-6,
4-7, 4-8, 4-9, 4-10, 4-12, 4-22
external ports (TigerSHARC processors),
6-2
external vector tables, 4-21
EZ-KIT Lite board targets, 1-9
F
-f h|s1|s2|s3|b, splitter switch, 7-6
-f hex|ascii|binary|include, loader switch for
Blackfin, 2-66
-fhex|ASCII|binary|include|s1|s2|s3, loader
switch for SHARC, 3-29, 4-28, 5-45
-fhex|ascii|binary|s1|s2|s3, loader switch for
TigerSHARC, 6-9
file formats
list of, 2-64
ASCII, 2-21, 2-66, 6-9, A-15
binary, 2-66, 6-9
build files, A-5
byte-stacked (.stk), 7-4, 7-6, 7-7
debugger input files, A-16
hexadecimal (Intel hex-32), 2-66, 6-9,
7-4, 7-6
include, 2-66, 6-9
reference information, A-17
s-record (Motorola), 6-9, 7-4, 7-6
INDEX
file formatting
selecting for output, 2-67
specifying word width, 2-72
file searches, rules for, 1-16
final blocks
See also last blocks (Blackfin processors)
introduction to, 1-14
SHARC processors, 3-18, 5-18, 5-29
FLAG8-5 bits,
ADSP-BF531/2/3/4/6/7/8/9
processors, 2-22
FLAG pins, ADSP-2106x/160 processors,
3-23
flag words (Blackfin processors)
ADSP-BF531/2/3/4/6/7/8/9 processors,
2-35
ADSP-BF535 processors, 2-14
ADSP-BF561/6 processors, 2-45, 2-49
flash memory
See also PROM/flash boot mode
devices, 1-8
hold-time cycle selection, 2-66, 2-75
FLG0 signal, 5-10, 5-11
fltdump utility, B-4
frequency, 3-15, 4-13
G
-ghc #, loader switch for Blackfin, 2-66
global header cookies (Blackfin processors),
2-66
global headers (Blackfin processors)
ADSP-BF535 processors, 2-12, 2-13
ADSP-BF561/6 processors, 2-44
GPEP0 register, 4-8, 4-11
GPLB0 register, 4-14
GPSRX register, 4-16
VisualDSP++ 4.5 Loader and Utilities Manual I-7