Feasibility Study and Technical Report - Pretivm

Table 13.5SubcompositeWeight(kg)Composite BJ-A Composition (2012 Test Program)VOK-2 180VOK-3 75VOK-4 110WZ-1 75WZ-2 60In 2013, Inspectorate conducted further confirmation test work using 28 drill coresamples collected from the VOK Zone in 2012. The drill core intervals were blended intoeight composites according to spatial locations. The composite samples were furtherblended to generate two master composites, MU and ML composite, representing theupper zone and lower zone of the VOK deposit, respectively.Table 13.6 summarizes information on the drill core intervals used to generate thecomposite samples.Table 13.6Composite Samples (2013 Test Program)CompositeSWU SEU SWL SEL NWU NEU NWL NELHole NumberSU-357 SU-315 SU-338 SU-302 SU-454 SU-334 SU-304 SU-316SU-390 SU-394 SU-340 SU-312 SU-490 - SU-350 SU-327SU-447 SU-398 SU-342 - - - SU-364 SU-334SU-451 SU-468 SU-419 - - - - -SU-476 SU-484 - - - - - -- SU-507 - - - - - -13.3.3 2010 TO 2011 TESTS SAMPLESThe composite samples prepared for the 2010 to 2012 test work were originally from theWest Zone, the Galena Hill Zone, and the Bridge Zone. The drillhole interval samplesfrom the Galena Hill Zone (identified as GH2) and the Bridge Zone (identified as BZ2)were grouped into high- and low-grade composites; however, the test work was focusedon the high-grade composite samples only. The WZ1 composite sample was also tested,which was comprised of separate drillhole intervals from the Gossan Hill Zone, R8 Zone,and West Zone. The composite samples and individual sample identifications arepresented in Table 13.7.Pretium Resources Inc. 13-5 1291990200-REP-R0012-02Feasibility Study and Technical Report on the BrucejackProject, Stewart, BC