13.07.2015 Views

Feasibility Study and Technical Report - Pretivm

Feasibility Study and Technical Report - Pretivm

Feasibility Study and Technical Report - Pretivm

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

For VOK <strong>and</strong> West Zone the interpolation was controlled by:• Minimum/maximum numbers of composites: West Zone: 5/50 per block VOK: 5/20 per block (5/50 for pass 2)• discretisation: 1 by 1 by 1 into small scale discretized blocks• maximum number of composites per hole: 10 (West Zone), 6 (VOK)• Search ellipse: West Zone: 75 m by 75 m by 30 m VOK: 35 m by 35 m by 10 m (70 m by 70 m by 20 m for pass 2).For VOK, approximately 3% of the data is above 5 g/t Au <strong>and</strong> the average proportion ofhigh-grades within the blocks was estimated at 3% within the Indicated portions of theestimate. For West Zone, around 5% of the data is above 5 g/t Au <strong>and</strong> the averageproportion of high-grades within the blocks was estimated at 5% within the Measured<strong>and</strong> Indicated portions of the estimate.14.10.4 LOW-GRADE DOMAINSThe background low-grade domain for VOK was estimated with ordinary kriging usingdynamic anisotropies to locally adjust the search <strong>and</strong> variogram orientations to reflectthe main trends of the folding in this area. The search <strong>and</strong> variogram parameters usedwere the same as for the low-grade population within the high-grade domains.The background low-grade domain for West Zone was estimated with ordinary kriging intoa domain using the same search <strong>and</strong> variogram parameters as for the low-gradepopulation within the high-grade domains.The background low-grade domains were estimated using 1.5 m top cut composites withsoft boundaries between the low-grade <strong>and</strong> high-grade domains, but excluding the highgradepopulation from within the high-grade domains.14.11 DENSITY ESTIMATION AND ASSIGNMENTDensity was estimated using simple kriging, with a global mean of 2.54 t/m 3 , into 10 mEby 10 mN by 10 mRL parent blocks. Density values were interpolated using 1.5 mcomposites with parameters established from the variography analysis.The interpolation was controlled by:• minimum/maximum numbers of composites: 8/30 per block(2/8 for pass 2)• discretisation: 4 by 4 by 4• maximum number of composites per hole: 9Pretium Resources Inc. 14-16 1291990200-REP-R0012-02<strong>Feasibility</strong> <strong>Study</strong> <strong>and</strong> <strong>Technical</strong> <strong>Report</strong> on the BrucejackProject, Stewart, BC

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!